Bed size：2110×1000/560-980mm；

1, the bed frame adopts ≥30×60×1.5mm cold-rolled rectangular steel pipe, the thickness of the bed panel is ≥1.2mm, the metal surface is degreased, phosphating, oil removal, corrosion prevention, rust prevention and other treatment, using electrostatic spraying high-quality epoxy resin powder, high temperature curing treatment. The film thickness is 60-80um, the adhesion reaches the level 0 standard, the spray solidification degree reaches 50kg knocking force, the finished surface coating film has no defects such as peeling, sticking paint and wrinkles, and has good corrosion resistance and impact resistance.

2, the bed panel is made of high-quality cold-rolled board, the backplane is made of electric wood, which can be transmitted by X-ray;

3, the headboard and the tail board, the use of pure PP plastic blow molding, both sides of the back with streamlined R 150mm arc shape, specifications: width 900*500* height 500mm; The upper part has 580*40*25R elongated hole armrest ∮40mm; Upper edge thickness ≥40mm; Bottom edge thickness 90mm; Headboard and tailboard with hidden lock switch, stable and reliable, easy to disassemble, can be used as CPR first aid function;

*4, guardrail: The use of pure PP plastic blow molding, specifications: long guard 980*290mm=2; Short guard 450*290mm=2; Guardrail lifting storage with damping buffer and in place locking function 4 pieces PP guardrail are equipped with U-shaped ball flow Angle indicator, convenient for nurses clinical nursing; Both ends of the 4 pieces of guard must have 250*80mm, 180*130mm Angle ∮40mm circular handrail; Both inside and outside the guardrail are equipped with a control operator, and the unilateral bed rail is divided into two columns; Guardrail in the examination or treatment of patients, the guardrail can be put under the bed for examination or treatment of patients;

*5, motor: the use of "Denmark" LINK imported motor, with 2 straight column motors, 6 push rod motors; The whole bed operation is controlled by the nurse controller, the performance is stable and reliable, no noise.

6, equipped with a battery device to ensure trouble-free uninterrupted operation for 24 hours.

*7, casters: casters, the diameter of 6 inches of double-row casters, foot wheel shaft head material must be made of 30mm diameter steel seamless pipe; Left and right 1 round wheel combination; Each round wheel built-in 2 fully enclosed self-lubricating bearings, waterproof, anti-debris winding design, caster bracket made of aviation aluminum die-cast; Central control brake system, one foot brake four wheel positioning;

*8, function: eight functions: back lifting Angle: 0-75°±5°, leg lifting Angle: 0-45°±5°; Overall lifting 560-980mm, front and back tilt 17°±5°, leg extension 200±50mm; Turn the leg plate 10°±5°; One key heart chair, CPR one key cardiopulmonary resuscitation function.

9, the bed body can bear the load ≥250kg; Bed weight ≥120kg.

10, Weighing system

Maximum weight: 200kg/440lb2, minimum weight: 0.1kg/0.2lb

Weighing error: ±0.25%F.S

Alarm accuracy: ±0.1kg

Display: LCD (liquid crystal display) +LED(backlight assistant version)

Weighing unit: kg/lb

1), continuous monitoring of weight: can continuously observe the weight change of the person, and alarm at the set point.

2), weight storage: When the weight is stable, it can lock and store at least 20 groups of data, and has power failure protection function.

3) Alarm range setting: 5%-95%F.S

4), Alarm selection: weight change alarm. (Patient alarm at bed position: 1. Patient sitting up 2. Side seat 3. Out of bed)

11. The bottom of the bed frame is equipped with PP blow molding shelf decoration cover; Specification 1600*700/550*130mm; There must be specifications in the middle: 720*400*35mm, concave tray debris rack; Make sure items don't slip left, right, and back.

12, the head of the bed in the middle of the two drop socket, the middle of the bed on both sides of a telescopic drop socket, aperture 20mm, stamping by metal material, with ABS engineering plastic inner core, to prevent the use of the drop rack damage and reduce noise; Another four drainage bag hooks;

13, infusion stand: stainless steel two-stage four-claw drop stand, diameter 19mm, durable, adjustable height, infusion rod hook can be closed, durable;

Packing list :

1, bed body (bed surface, bed frame, central control caster, infusion rod jack, drainage hook, anti-collision wheel)

2, four-piece guardrail, guardrail controller, nurse controller, hand controller; LINK motor

3. Headboard and tail board

4, backboard can be X-ray (optional)

5, 5-inch LCD display (patient information, out of bed alarm, weight record), configuration weighing system

6, stainless steel infusion rack

7. Bed bottom shelf